Design and Analysis of PA66 with MOS2 used in Vehicle Parts using ANSYS

  • J Nareshkumar M.E., CAD/CAM, Department of Mechanical Engineering, Arunai Engineering College,Thiruvannamalai, Tamil Nadu, India
  • A Ekambaram Assistant Professor, Head of Department, Department of Mechanical Engineering, Arunai Engineering College, Thiruvannamalai, Tamil Nadu, India

Abstract

Polyamides (PA) of Glass fiber (GF) with Molybdenum disulfide (MOS2) are used in various types of friction and wear reduction application of vehicle parts. Self lubricating composites like MOS2 exhibits advanced mechanical properties and abrasive resistance. In this work, comparative analyses of various material properties are studied and developed components which are having similar requirements in the vehicle parts. There are three materials are identified for the comparative analysis. 1. Power metallurgical sintered parts 2. Polyamides Grade 6 (PA6) without adding fillers. 3. Polyamides with Glass filled (PA 66) fibers and MOS2

Published
2018-04-28
Statistics
Abstract views: 312 times
PDF downloads: 0 times
Issue
Vol 5 No 4 (2018)
Section
Article
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.